Configures the VLAN info portion of the circuit ID of a VLAN.
| vlan_info | Specifies the circuit ID VLAN information for each VLAN in the format of VLAN Info-Port Info; maximum length is 32 bytes. |
| vlan_name | Specifies the VLAN for which DHCP should be enabled. |
| all | Specifies all VLANs. |
| dynamic | Configuration options for dynamically created VLANs. |
The default value is the ASCII representation of the ingress VLAN‘s ID.
This command allows you to configure the VLAN information portion of the circuit ID of a VLAN. The VLAN info is a string of characters of up to 32 bytes in length, and is entered in the format of VLAN InfoPort Info. When a specific value is not configured for a VLAN, vlan_info defaults to the ASCII representation of the ingress VLAN‘s ID.
This command was first available in ExtremeXOS 12.1.
Dynamic VLAN option added in ExtremeXOS 30.2.
This command is available on all Universal switches supported in this document.